3300 XL Proximity Probe | 330104-00-12-10-02-00 Bently Nevada

Overview

Bently Nevada presents the 330104-00-12-10-02-00, a 3300 XL 8 mm Proximity Probe made in the U.S.A. Equipped with an M10x1 thread and armor, it’s designed to seal the differential pressure between the probe tip and case, thus being highly suitable for non – contacting measurement in industrial scenarios.

Technical Specification

• Brand: Bently Nevada
• Model: 3300 XL 8 mm Proximity Probes
• Product Number: 330104-00-12-10-02-00
• Physical Parameters:
  • Unthreaded length: 0 mm
  • Overall case length: 12 mm
  • Total length: 1.0 meter (3.3 feet)
  • Connector type: Miniature coaxial ClickLoc connector, standard cable
• Electrical Parameters:
  • Proximitor sensor input: Accepts one non – contacting 3300 – series 5 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.
  • Power supply: Requires -17.5 Vdc to -26 Vdc when installed with non – incendive circuit (connected per installation drawing 140979) at 12 mA maximum consumption; -23 Vdc to -26 Vdc with barriers. A voltage more positive than -23.5 Vdc may reduce the linear range.
  • Supply sensitivity: Less than 2 mV change in output voltage per volt change in input voltage.
  • Output resistance: 50 Ω
  • Nominal probe DC resistance: 7.59 ± 0.50 Ω for a 1.0 – meter probe
• Mechanical Parameters:
  • Probe tip material: Polyphenylene sulfide (PPS)
  • Probe case material: AISI 303 or 304 stainless steel
  • Probe sealing material: Viton® O – ring

For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet