Product details
Overview
This is an 8mm vibration sensor (330103-00-03-90-12-CN) from Bently Nevada used to measure movement in machines. It has a long 9-meter cable (about 30 feet) and comes with a standard screw thread (M10×1 size) for easy installation.
Basic Product Info
- Made by: Bently Nevada
- Part No.: 330103-00-03-90-12-CN
- Type: 8mm vibration sensor
- Size: 8mm wide
- Screw size: M10×1 (standard metric thread)
- Cable length: 9 meters (about 30 feet)
Detailed Specs
- What the numbers mean :
- 330103: Basic 8mm sensor with screw thread
- 00: No smooth part before thread
- 03: Very short 3mm body
- 90: Extra long 9 meter cable
- 12: Special click-on connector
- CN: Approved for use in China
- Electrical Info:
- Resistance: 9.87 ohms (±0.50 ohms)
- Power needed: -18V to -24V DC
- Signal output: -1V to -17V DC
- Measurement Info:
- Works best between: 0.25mm to 2.3mm from surface
- Best distance: 1.27mm from machine part
- Sensitivity: About 200mV per 0.001 inch movement
- Where it works:
- Temperature range: -52°C to +177°C (-62°F to +350°F)
- Hot weather use (tip only): Up to +218°C (+425°F)
- Humidity: Works in wet air (93% for 56 days)
- Don’t store below: -34°C (-30°F)
- How to install:
- Needs matching 9m sensor unit
- Max wire run: 305m (1000 feet)
- Best wire type: 3-core shielded cable
- Wire size: 0.2 to 1.5 mm² (16 to 24 AWG)
Approvals
- China safety approval
- Meets international testing standards
Where to use it
- Factory machines
- Power plant equipment
- Large motors and pumps
- Spinning machinery
Contact Information
Questions? Email: [email protected]
There are no reviews yet.