Bently Nevada 3300 XL Proximity Probe | 330104-10-20-10-02-CN

Overview

The 330104-10-20-10-02-CN is a 3300 XL 8 mm Proximity Probe crafted by Bently Nevada in the U.S.A. It comes with an M10 x 1 threaded design and armor, allowing it to seal differential pressure between the probe tip and case via a Viton® O – ring. This probe is meant to be used in tandem with a 3300 – series Proximitor Sensor and extension cable under particular environmental and power – supply conditions.

Technical Specification

1. General Information
   • Brand: Bently Nevada
   • Model: 330104-10-20-10-02-CN
   • Product Type: 3300 XL 8 mm Proximity Probes
2. Probe Dimensions
   • Unthreaded Length: 10 mm
   • Overall Case Length: 20 mm
   • Total Length: 1.0 meter (3.3 feet)
3. Connector and Approval
   • Connector and Cable – Type: Miniature coaxial ClickLoc connector, standard cable
   • Agency Approval: Country Specific Approval (CN)
4. Electrical Specifications
   • Nominal Probe DC Resistance (1.0 m): 7.59 ± 0.50 Ω
   • Proximitor Sensor Input: Accepts one non – contacting 3300 – series 5 mm or 3300 XL 8 mm Proximity Probe and Extension Cable
   • Power Supply
     • Non – incendive: -17.5 Vdc to -26 Vdc, maximum consumption of 12 mA as per installation drawing 140979
     • With barriers: -23 Vdc to -26 Vdc. A voltage more positive than -23.5 Vdc may lead to a reduction in the linear range.
   • Sensitivity: Output voltage changes less than 2 mV per volt change in input voltage
   • Output Resistance: 50 Ω
5. Mechanical Specifications
   • Probe Tip Material: Polyphenylene sulfide (PPS)
   • Probe Case Material: AISI 303 or 304 stainless steel (SST)
   • Pressure Sealing: Seals differential pressure using a Viton® O – ring

For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet

More Bently Nevada Items