Bently Nevada | Proximity Probes | 330103-00-11-10-02-00

Overview

Bently Nevada produces the 330103-00-11-10-02-00 3300 XL 8 mm Proximity Probes. These probes, featuring an M10 x 1 thread without armor, are crafted to accurately measure the distance between the probe tip and the target, catering to a wide range of industrial needs.

Technical Specification

• Brand: Bently Nevada
• Model: 3300 XL 8 mm Proximity Probes (Product No. 330103-00-11-10-02-00)
• Product No. Suffix Meaning:
  • 00: Unthreaded length is 0 mm.
  • 11: Overall case length is 110 mm.
  • 10: Total length is 1.0 meter (3.3 feet).
  • 02: Comes with a miniature coaxial ClickLoc connector and a standard cable.
  • 00: No agency approval is required.
• Nominal Probe DC Resistance: A 1.0 – meter probe has a resistance from the center conductor to the outer conductor of 7.59 ± 0.50 Ω.
• Field Wiring: It needs 0.2 to 1.5 mm² (16 to 24 AWG) wiring. We suggest using 3 – conductor shielded triad cable and tinned field wiring. The maximum length between the 3300 XL Proximitor Sensor and the monitor is 305 meters (1,000 feet). Refer to the frequency response graphs (Figures 10 and 12) for signal roll – off at high frequencies when using longer field wiring.
• Linear Range: The linear range spans 2 mm (80 mils), starting about 0.25 mm (10 mils) from the target and ranging from 0.25 to 2.3 mm (10 to 90 mils), corresponding to approximately –1 to –17 Vdc.
• Recommended Gap Setting for Radial Vibration: Set the gap at – 9 Vdc [around 1.27 mm (50 mils)].
• Mechanical: The probe tip is PPS, and the case is SST. The M10x1 thread has a maximum engagement length of 15 mm, and the probe weighs 323 g/m (11.4 oz).
• Relative Humidity: When tested in 93% humidity according to IEC standard 68 2 3 for up to 56 days, the average scale factor (ASF) changes by less than 3%.

Contact Information

For any inquiries, please contact: [email protected]
For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet

Other Related Items