330104-00-02-50-02-00 Bently Nevada | 3300 XL Proximity Probe

Overview

The 330104-00-02-50-02-00 is a 3300 XL 8 mm Proximity Probe manufactured by Bently Nevada in the United States. Engineered for non – contacting measurement, it features an M10 x 1 threaded design with armor and can seal the differential pressure between the probe tip and case using a Viton® O – ring.

Technical Specification

• Brand: Bently Nevada
• Model: 330104-00-02-50-02-00
• Product Type: 3300 XL 8 mm Proximity Probes
• Probe Details:
  • Thread: M10 x 1 with armor
  • Unthreaded Length: 00mm
  • Overall Case Length: 02mm
  • Total Length: 5.0 meters (16.4 feet)
  • Connector: Miniature coaxial ClickLoc connector, standard cable
  • Agency Approval: Not required (00)
• Electrical Specs:
  • Proximitor Sensor Input: Accepts one non – contacting 3300 – series 5 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.
  • Power Supply: Requires – 17.5 Vdc to – 26 Vdc when installed with a non – incendive circuit as per drawing 140979 (maximum consumption of 12 mA), and – 23 Vdc to – 26 Vdc with barriers. Operating at a voltage more positive than – 23.5 Vdc may reduce the linear range.
  • Sensitivity: Output voltage changes by less than 2 mV per volt change in input voltage.
  • Output Resistance: 50 Ω
• Mechanical Specs:
  • Probe Tip Material: Polyphenylene sulfide (PPS).
  • Probe Case Material: AISI 303 or 304 stainless steel.
• Nominal Probe DC Resistance: For a 5.0 – meter probe, the resistance from the center conductor to the outer conductor is 8.73 ± 0.50 Ω.

For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet