330104-01-05-50-02-05 Bently Nevada | 3300 XL Proximity Probe

Overview

The 330104-01-05-50-02-05 is a 3300 XL 8 mm Proximity Probe from Bently Nevada, made in the U.S.A. It is designed for non – contacting measurement applications. Featuring an M10 x 1 threaded design with armor, it can effectively seal the differential pressure between the probe tip and the case using a Viton® O – ring. Additionally, it holds CSA, ATEX, and IECEx approvals.

Technical Specification

• Brand: Bently Nevada
• Model: 330104-01-05-50-02-05
• Product Type: 3300 XL 8 mm Proximity Probes
• Probe Details:
  • Thread: M10 x 1 with armor
  • Unthreaded Length: 01mm
  • Overall Case Length: 05mm
  • Total Length: 5.0 meters (16.4 feet)
  • Connector: Miniature coaxial ClickLoc connector, standard cable
  • Agency Approval: CSA, ATEX, IECEx Approvals (05)
• Electrical Specs:
  • Power Supply: Requires – 17.5 Vdc to – 26 Vdc when installed with a non – incendive circuit as per drawing 140979 (maximum consumption of 12 mA), and – 23 Vdc to – 26 Vdc with barriers. Operating at a voltage more positive than – 23.5 Vdc may lead to a reduced linear range.
  • Sensitivity: The output voltage changes by less than 2 mV per volt change in the input voltage.
• Mechanical Specs:
  • Probe Tip Material: Polyphenylene sulfide (PPS).
  • Probe Case Material: AISI 303 or 304 stainless steel.
• Nominal Probe DC Resistance: For a 5.0 – meter probe, the resistance from the center conductor to the outer conductor is 8.73 ± 0.50 Ω.

For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet