330130-075-13-05 Bently Nevada | Armored FluidLoc Cable

Overview:

The Bently Nevada 330130-075-13-05 Extension Cable is designed for use with 3300 XL series proximity probes, providing a reliable connection between the sensor and monitoring system. This extension cable, made in the U.S.A, is built with durability in mind, featuring an armored FluidLoc cable and connector protector. It offers both flexibility and robustness, especially for applications requiring resistance to harsh conditions such as turbine oil exposure.

Technical Specifications:

• Brand: Bently Nevada
• Product No.: 330130-075-13-05
• Cable Type: Extension cable for 3300 XL proximity probes
• Made In: U.S.A
• Cable Length: 7.5 meters (24.6 feet)
• Connector Protector and Cable: Armored FluidLoc cable with connector protector
• Approvals:
  • CSA
  • ATEX
  • IECEx
• Weight:
  • 103 g/m (1.5 oz/ft)
  • Total weight: 0.772 kg (1.7 lbs)
• DC Resistance:
  • RCORE (Center Conductor to Center Conductor): 1.65 ± 0.25 Ω (at 7.5m length)
  • RJACKET (Outer Conductor to Outer Conductor): 0.49 ± 0.10 Ω (at 7.5m length)
• Power Supply Requirement:
  • -17.5 Vdc to -26 Vdc
  • Maximum current consumption: 12 mA
  • Requires barriers for operation at -23 Vdc to -26 Vdc
• Cable Capacitance: 69.9 pF/m (21.3 pF/ft) typical
• Field Wiring:
  • 0.2 to 1.5 mm² (16 to 24 AWG)
  • Recommend using 3 conductor shielded triad cable with tinned field wiring
• Linear Range:
  • 2 mm (80 mils), with the linear range from 0.25 mm (10 mils) to 2.3 mm (90 mils)
  • Voltage range: approximately –1 to –17 Vdc
• Supply Sensitivity: Less than 2 mV change in output voltage per volt change in input voltage
• Output Resistance: 50 Ω
• Frequency Response: Maximum cable length between sensor and monitor is 305 meters (1,000 feet). Signal roll-off can occur at high frequencies with longer field wiring.

FAQ:

1. What is the maximum length supported by this extension cable?
   • The cable supports a maximum length of 305 meters (1,000 feet) between the 3300 XL proximitor sensor and the monitoring system.
2. What is the recommended power supply for the extension cable?
   • The recommended power supply is between -17.5 Vdc and -26 Vdc.
3. What approvals does this extension cable have?
   • This cable is CSA, ATEX, and IECEx approved for use in hazardous environments.

For more detailed information: 3300 XL 8 mm Proximity Transducer System Datasheet